Open up the Control Panel and click on Network and Internet > Network and Sharing Center > Change adapter settings. Right-click on your network adapter, and go to Properties. In the Properties menu, highlight "Internet Protocol Version 4 (TCP/IPv4) and click Properties. In this menu, you'll be able to set your IP address.

1. Connect your Android device to your computer via USB. 2. Open a command prompt or terminal on your computer and navigate to the ADB directory. 3. Enter the command: adb shell ip -f inet addr show wlan0 and press Enter. 4. Look for the IP address listed next to “inet”. This is your hotspot IP address.

Connect the client to wifi hotspot. Now check the ipaddress of the Client. It should be like 192.168.42.yy; Go to 'WiFi settings' on your client, long tap on the Hotspot's wifi; Tap on “Modify Network”. Then select “Show Advanced Settings”. Select IP settings from DHCP to ”Static” mode. Fill the following

Open Network and Internet Settings. Press and hold the Windows key and X key to open the power user menu. Click on the “Control Panel” to see the screen like below and then navigate to “Network and Internet” option. Open Control Panel and Network and Internet Option. You will see the following options:

Connect the Airtel 4G hotspot device to your computer using the microUSB cable included in the box. Then press the button in the middle of the device for a few seconds until both the lights turn on. If both the lights are not ON, press again and release after a few seconds. When the device is ON and Wi-Fi hotspot is active, the admin screen

On previous phones there was always a setting to configure the default ip address range and subnet for client DHCP. This does not seem to be the case for Samsung S5. Am i missing something, or is that configuration option no longer available? My phone has settings of 192.168.43/24 with ip addresses assigned starting from 192.168.43.192.
If you request an IP Address within the range managed by the DHCP server which is available this should be honoured, otherwise the DHCP server will allocate an address as normal. If you want an IP Address outside the range managed by the DHCP server e.g. if you have a range of addresses reserved use the inform directive. FdpUfx.
  • 05jjwc4f9t.pages.dev/943
  • 05jjwc4f9t.pages.dev/891
  • 05jjwc4f9t.pages.dev/576
  • 05jjwc4f9t.pages.dev/778
  • 05jjwc4f9t.pages.dev/825
  • 05jjwc4f9t.pages.dev/450
  • 05jjwc4f9t.pages.dev/693
  • 05jjwc4f9t.pages.dev/334
  • 05jjwc4f9t.pages.dev/415
  • 05jjwc4f9t.pages.dev/236
  • 05jjwc4f9t.pages.dev/20
  • 05jjwc4f9t.pages.dev/434
  • 05jjwc4f9t.pages.dev/161
  • 05jjwc4f9t.pages.dev/744
  • 05jjwc4f9t.pages.dev/906

    • how to change hotspot ip address